- A concentrated, water-based stripper for water emulsion floor finishes
- Developed to re-emulsify metal cross-linked and other polymers without the need for vigorous mechanical agitation
- Can be used as a routine stripper on resilient tile, linoleum, terrazzo, quarry tile and concrete
- Fast acting, perfect for hard to reach areas
| Container Size |
Gallon |
| Case Quantity |
4 |
| Dilution Range |
1:2 |
| pH |
12.0 - 13.0
|
Odor
|
Solvent
|
| Color |
Colorless to Light Amber
|
| Hazards Classification |
Acute toxicity - oral: 4
Acute toxicity - dermal: 5
Acute toxicity - inhalation (dusts/mists): 4
Skin corrosion/irritation: 1B
Serious eye damage/eye irritation: 1
Specific target organ toxicity (single exposure): 3 |
- Dilute with water. Because floor condition will vary, a good starting point is a dilution of 1 part of concentrate to 2 parts of hot water. Depending on results, increase or decrease the amount of concentrate. Do not use the concentrate without some water.
- Apply the solution liberally with a string mop and allow to stand for at least 5 minutes. Keep the floor wet; do not allow the solution to dry.
- Pick up the solution with an auto-scrubber or wet vac, each equipped with a squeegee.
- Rinse floor twice with warm water and neutral cleaner.
- Allow floor to dry and apply finish.
This product may be used with a floor scrubber to remove extremely heavy build-up of finishes. Merely increase the dilution to 1 to 4.