IPI Logo - Building Brighter Futures

IPI's products and services may be purchased only by governmental agencies, school districts, non-profit groups and employees of these organizations. 


Welcome, Sign In

P: 800-332-7922 | E-mail IPI
Blog Link Twitter Link FaceBook Link LinkedIn Link YouTube Link Instagram Link
Home > Facilities > Chemicals & Cleaning Supplies > Floor Care > Finishes >

Pro-Line 21% Finish 4x1 Gallon

There are no reviews yet. | Write a review

Item #: FC20575-CS
Ships From: IPI Anamosa Hskpg/Laundry

Priced per Case of (4) four Gallon Containers.

  • Creates a spectacular gloss with high speed buffers
  • Developed especially for compatibility with extra-high speed buffing machines
  • Heel mark and scuff resistant
  • Gives floors the wet look
  • Designed for heavy traffic and great durability
Scroll down ↓ for further specifications.
Price: Price: $71.78
Make selections below (if available) to update price.

    Quantity:

    Quantity

    		12+

     Price Each 

    		$68.19
    • Creates a spectacular gloss with high speed buffers
    • Developed especially for compatibility with extra-high speed buffing machines
    • Heel mark and scuff resistant
    • Gives floors the wet look
    • Designed for heavy traffic and great durability
    Container Size Gallon
    Case Quantity 4
    Coverage 2,500 sq ft / gallon
    Total Solids
    		21%
    pH 8.5 - 9.5
    Odor
    		 Ammonia
    Color White
    Hazards Classification Acute toxicity - oral: 5
    Skin corrosion / irritation: 3

    Floors should be properly stripped of all old wax and finish, rinsed and neutralized, prior to applying this finish.

    PREPARATION:

    1. Use our Quick Strip to remove old wax, finish, resin and soil.
    2. Scrubbing machine and stripping pads will expedite removal.
    3. Rinse thoroughly and let dry.

    APPLICATION:

    1. Use only clean equipment (applicator, mop, pails, etc.) in applying the finish.
    2. Apply thin, even coat. Do not rub. Another thin coat is recommended for added protection. One gallon covers 2,500 sq. ft. (Allow finish to dry completely before buffing).
    3. Allow 15 to 20 minutes for drying before applying second coat. If no seal is used, three or four coats are recommended.
    4. Burnish finish between coats for improved gloss and improved initial film toughness.
    5. Buff with high speed machine (1000 rpm or more) and beige ultra high speed pad for super spectacular gloss.

    MAINTENANCE:

    1. Daily: Dust mop or sweep as necessary to remove superficial dirt. 
    2. Dirty Floors: Using 2-4 ounces of our Mop It Once neutral cleaner per gallon of water, mop or scrub using red pad. Let dry. Burnish with high speed machine and beige pad. For better results apply our Mop On Buffer and then burnish when dry.
    3. Periodic: 10-12 weeks or when necessary, using 2-4 ounces of our Mop It Once per gallon of water, deep scrub using blue pad and machine. Rinse. Let dry. Apply 1-2 thin coats of finish. When dry, buff with High Speed and beige pad.
    4. Complete stripping can be extended to 12 - 2 years if maintenance steps 2 & 3 are conscientiously followed.
    5. Stripping: When required use stripping pads and machines. Mix 12-16 ounces of our Quick Strip per gallon warm (not hot) water. Strip, rinse thoroughly, allow to dry and refinish floor.